Paint data

Paint coverage by brand: 12 interior paints compared

Every can of paint states how much wall a gallon covers. We read the figure for 12 popular interior wall paints from 5 brands straight from each maker’s product page or technical data sheet, so you can compare them side by side and see how much the label you trust changes what you buy.

  • 10 of 12 top out at 400 sq ft per gallon. Only 2 claim more, at 450.
  • 200–400 sq ft is how far the low end of the stated ranges spreads.
  • 3.3 vs 1.5 gal for the same room and two coats, at the lowest and highest figures.

Stated coverage per gallon, per coat

Square feet per US gallon as published by each manufacturer. Bars show a stated range; a ring marks a product that states only a maximum.
  • Benjamin Moore Ben Interior Paint 400–450
  • Benjamin Moore Regal Select Interior Paint 400–450
  • Glidden Diamond Interior Paint + Primer up to 400
  • Glidden Premium Interior Paint + Primer up to 400
  • Benjamin Moore Aura Interior Paint 350–400
  • Benjamin Moore Ultra Spec 500 Interior Paint 350–400
  • Sherwin-Williams Duration Home Interior Acrylic Latex 350–400
  • Sherwin-Williams Emerald Interior Acrylic Latex 350–400
  • Sherwin-Williams SuperPaint Interior Acrylic Latex 350–400
  • Valspar Ultra Interior Paint + Primer 300–400
  • Behr Premium Plus Interior 250–400
  • Valspar Signature Interior Paint + Primer 200–400

The full dataset

Each figure links to the page we read it from.

Download the data (CSV)

Manufacturer-stated interior paint coverage, checked October 10, 2026
Paint Coverage (sq ft/gal) Conditions stated Source
Ben Interior Paint Eggshell 400–450 Varies with surface porosity, color base, and application. Product page
Regal Select Interior Paint Matte 400–450 Varies with surface porosity, color base, and application. Product page
Glidden Diamond Interior Paint + Primer Flat (PPG53-110) up to 400 Up to this figure on primed, smooth, nonporous surfaces; excludes porosity and application loss. Data sheet
Glidden Premium Interior Paint + Primer Semi-Gloss (GLN6411N) up to 400 Up to this figure on primed, smooth, nonporous surfaces; excludes porosity and application loss. Data sheet
Aura Interior Paint Matte 350–400 Varies with surface porosity, color base, and application. Product page
Ultra Spec 500 Interior Paint Flat 350–400 Varies with surface porosity, color base, and application. Product page
Duration Home Interior Acrylic Latex Matte (A96 series) 350–400 At 4 mils wet, 1.6 mils dry film thickness. Data sheet
Emerald Interior Acrylic Latex Satin (K37 series) 350–400 At 4 mils wet, 1.6 mils dry film thickness. Data sheet
SuperPaint Interior Acrylic Latex Flat (A86 series) 350–400 At 4 mils wet, 1.4 mils dry film thickness. Data sheet
Valspar Ultra Interior Paint + Primer All sheens 300–400 Surface conditions and application technique affect coverage. Product page
Behr Premium Plus Interior Eggshell Enamel (No. 2050) 250–400 Depends on application method and substrate porosity; excludes spray loss. Data sheet
Valspar Signature Interior Paint + Primer All sheens 200–400 Surface conditions and application technique affect coverage. Product page

What the numbers mean

A coverage figure is the area one gallon covers in one coat under the conditions the maker sets. Sherwin-Williams ties its figures to a film 4 mils thick when wet. Glidden quotes “up to” 400 sq ft on primed, smooth, nonporous walls. Behr and Valspar state ranges that depend on the surface and how you apply the paint.

The top of a range is a best case: smooth, sealed, previously painted walls rolled at the recommended thickness. Bare drywall, texture, a deep color change, and spraying all move you toward the bottom of the range or below it. So a wider range is not worse paint; it is a more candid label. Most makers also recommend two coats for an even finish.

How much the label changes your order

Take a 12 × 10 ft room with 8 ft walls and 20 sq ft of doors and windows. That is 332 sq ft of wall, or 664 sq ft for two coats.

  • At 450 sq ft per gallon you need 1.48 gallons, so 2 one-gallon cans.
  • At 200 sq ft per gallon you need 3.32 gallons, so 4 one-gallon cans.

Plan with the figure on the can you are buying, and lean toward the low end of its range for new drywall or a big color change. The paint calculator lets you enter that exact coverage.

How we collected this

  • We read each figure on October 10, 2026 from the manufacturer’s own product page or technical data sheet. Behr’s data sheet is the PDF Behr supplies to The Home Depot’s product listing.
  • Figures are what the makers state, not our own tests. Where a line has several sheens, we list the version we read; sheens in the same line usually share a figure.
  • We left out products whose current figure we could not open on the maker’s own site, rather than relying on retailer or review sites. Products change, so check the label before you buy.

Spotted a changed figure? Tell us and we will recheck it. You are welcome to cite or chart this data with a link to this page.