Paint guide
How much does a gallon of paint cover?
Many interior wall paints list roughly 350 to 400 square feet per gallon for one coat on a smooth, sealed surface. That is the number printed on the can. Real walls often get less, and every extra coat uses the full area again.
What the label number means
Coverage, or spread rate, is the area one gallon covers in a single coat at the film thickness the manufacturer intends. It assumes a surface that does not soak up much paint. Sherwin-Williams describes typical interior paint coverage as about 350–400 sq ft per gallon, with the surface and application changing the result. To see how brands compare, read our paint coverage by brand data, taken from 12 manufacturers’ product pages and data sheets.
Why your walls may get less
- Bare drywall, fresh joint compound, and plaster absorb more paint.
- Textured walls have more real surface than their flat measurement.
- Rolling too thin to stretch paint leads to an extra coat later.
- Strong color changes, especially light over dark, often need more coats.
How coverage changes the answer
| Coverage | One coat | Two coats | Buy |
|---|---|---|---|
| 250 sq ft/gal | 1.33 gal | 2.66 gal | 3 gal |
| 300 sq ft/gal | 1.11 gal | 2.21 gal | 3 gal |
| 350 sq ft/gal | 0.95 gal | 1.90 gal | 3 gal |
| 400 sq ft/gal | 0.83 gal | 1.66 gal | 2 gal |
Primer and ceilings
Primer labels often list a lower or wider range than paint because they are designed for porous surfaces. Use the primer calculator with your primer’s own figure. Ceilings use the floor area and are usually a different product; the ceiling paint calculator handles them separately.
Metric coverage
Outside the US, coverage is usually stated in square meters per liter. 350 sq ft per gallon is about 8.6 m²/L. Switch the calculator to metric and it converts both the coverage and the result to liters.
Where to find the real number for your paint
The front of the can usually gives a range such as “covers up to 400 sq ft”. The product’s technical data sheet, available on the manufacturer’s website, is more precise. Look for “spreading rate” or “coverage”, which is often stated together with a recommended film thickness. Use the lower end of the range if your walls are porous, textured, or changing color, and the upper end only for smooth, previously painted walls in a similar color.
Coverage in quarts, gallons, and pails
| Container | At 350 sq ft/gal | At 400 sq ft/gal |
|---|---|---|
| 1 quart | about 88 sq ft | 100 sq ft |
| 1 gallon | 350 sq ft | 400 sq ft |
| 5 gallons | 1,750 sq ft | 2,000 sq ft |
“Paint and primer in one” does not change the math
Self-priming paints still list their coverage per coat. They can save a separate primer coat over sound, previously painted walls, but many manufacturers still recommend a dedicated primer for bare drywall, stains, or glossy surfaces. Plan the coats the label describes for your surface, then let the coverage figure do the rest.
How to stretch a gallon without cutting corners
- Prime porous patches first so the topcoat does not soak in.
- Use the roller nap the label recommends for your wall texture.
- Load the roller fully and keep a wet edge rather than rolling paint thin, which only leads to another coat.
- Keep the lid on between uses so the paint does not skin over.
Frequently asked questions
How many square feet does a gallon of paint cover with two coats?
About half the label figure. A paint rated at 350 to 400 sq ft per gallon for one coat covers roughly 175 to 200 sq ft of wall with two coats.
How much does a quart of paint cover?
A quart is a quarter of a gallon, so at 350 to 400 sq ft per gallon a quart covers roughly 85 to 100 sq ft per coat. That suits an accent wall, a door, or touch-ups, not a whole room.
Does more expensive paint cover more area?
Not always more area per gallon, but it often hides better. Higher-quality paints tend to cover the old color in fewer coats, which can save a full coat of paint even when the label’s spread rate is similar.
Is ceiling paint coverage the same as wall paint?
Check the ceiling paint’s own label. Flat ceiling paints list their own coverage, and textured or popcorn ceilings can use noticeably more than a smooth surface.