Paint guide

How much paint do I need?

Start with the net wall area, decide how many coats you expect to apply, and use the product’s stated coverage for a planning estimate. Then round up to whole cans.

1. Calculate the wall surface

Multiply the room perimeter by the wall height. Subtract the measured area of doors and windows. A 12 × 10 ft room with 8 ft walls has 352 sq ft of gross wall area; subtract 20 sq ft of openings for 332 sq ft to paint. The wall measuring guide covers the details.

2. Multiply by coats and divide by coverage

Gallons before allowance = (net wall area × coats) ÷ coverage per gallon
Planning gallons = gallons before allowance × (1 + allowance ÷ 100)

At 350 sq ft per gallon per coat, the 332 sq ft room needs 0.95 gal per coat, 1.90 gal for two coats, and 2.09 gal with a 10% allowance. Rounded up, that is 3 gallons, with roughly 0.9 gal left in the last can.

3. Check the coverage on your can

Coverage is a planning input, not a constant. Paint, surface texture, color change, application method, and the manufacturer’s label all change the final amount. Sherwin-Williams describes typical interior paint coverage of about 350–400 sq ft per gallon; porous new drywall and rough textures sit lower.

Quick reference

Two coats at 350 sq ft per gallon, 10% allowance.
Room (8 ft walls) Wall area Buy
10 × 10 ft 320 sq ft 3 gal
12 × 12 ft 384 sq ft 3 gal
12 × 14 ft 416 sq ft 3 gal
14 × 16 ft 480 sq ft 4 gal
16 × 20 ft 576 sq ft 4 gal

Wall areas are gross; subtract your doors and windows in the calculator.

Before you buy

  • Check whether the label’s coverage is per coat.
  • Estimate the ceiling and trim separately; they often use different products.
  • Add primer for new drywall, patches, or big color changes.
  • Buy all the paint for one room at once to keep the tint batch consistent.

A second example: an open living room

Bigger rooms are where small assumptions add up. Take a 16 × 20 ft living room with 9 ft walls. The perimeter is 72 ft, so the gross wall area is 648 sq ft. It has two 3 × 5 ft windows (30 sq ft), an entry door of about 20 sq ft, and a 6 ft sliding patio door of about 40 sq ft, for 90 sq ft of openings and 558 sq ft to paint.

  • Two coats: 558 × 2 = 1,116 sq ft of painting.
  • At 350 sq ft per gallon: 1,116 ÷ 350 = 3.19 gallons.
  • With a 10% allowance: 3.51 gallons, so buy 4 gallons.

If you had guessed the openings instead of measuring them, a typical “subtract 10%” shortcut would have removed only 65 sq ft, and the patio door alone is 40. Measured openings are why the calculator asks for them separately.

Mistakes that lead to a short order

  • Using floor area. A 12 × 12 room has 144 sq ft of floor but around 384 sq ft of wall at 8 ft high. Paint follows the walls.
  • Forgetting the second coat. Coverage on the can is per coat, so two coats need twice the paint.
  • Adding different products before rounding. If the walls need 2.1 gallons and the ceiling 0.9 gallons of a different paint, you need 3 gallons of wall paint and 1 of ceiling paint, not 3 in total.
  • Skipping closets and alcoves. Closet walls are easy to leave out of the perimeter and can add 60 to 100 sq ft.

When a 5-gallon bucket makes sense

Once an estimate reaches four gallons or more, compare the price of a 5-gallon pail with single gallons. Pails are often cheaper per gallon, and one container means one tint batch. Painters also “box” paint, pouring all cans of the same color into one large bucket and mixing them, so any small tint difference between cans disappears.

Keep a little for touch-ups

Leftover paint is useful. Keep a sealed, labeled container with the room, color name, and sheen written on it. Store latex paint where it will not freeze. A small amount from the same batch makes later touch-ups blend far better than a new can.

Frequently asked questions

How much paint do I need for a 10 × 10 room?

With 8 ft walls the gross wall area is 320 sq ft. Subtract about 20 sq ft for a door and you have 300 sq ft. Two coats at 350 sq ft per gallon is 1.71 gallons, or 1.89 gallons with a 10% allowance, so buy 2 gallons.

Is one gallon enough for two coats in a small bedroom?

Rarely. A gallon covers roughly 350 to 400 sq ft for one coat, so two coats on one gallon only works on about 175 to 200 sq ft of wall. Even a 10 × 10 room with 8 ft walls has around 300 sq ft after openings.

Should I buy an extra quart instead of a whole gallon?

If your estimate lands just over a whole gallon, say 2.09 gallons, two gallons plus one quart (2.25 gallons) covers it. Make sure the quart is tinted from the same formula, and mix it with the gallons before you start so the color matches.

Does the paint estimate include primer or the ceiling?

No. Primer and ceiling paint are usually different products with their own coverage, so estimate them separately and round each one up to its own cans.

Sources

  1. Sherwin-Williams: paint calculator and coverage guidance
  2. Behr: how to determine how much interior paint to buy
  3. Benjamin Moore: paint calculator
  4. Room Calculators: paint coverage by brand dataset
Portrait of Moazam Ali

Written and reviewed by

Moazam Ali Founder and editor

Moazam Ali is a design engineer who builds Room Calculators. He researches each formula against manufacturer and trade sources, writes the guides, and tests every worked example against the live calculator.