Room Planning guide

How many lumens do I need for a room?

The amount of light a room needs depends on what you do in it. Lighting guides express that as foot-candles, and because one foot-candle is one lumen per square foot, turning it into a shopping list is one multiplication.

Lumens needed = floor area (sq ft) × target foot-candles

Brightness by room

Foot-candle ranges as suggested by Home Depot, with the lumens a 150 sq ft room would need.
Room Foot-candles Lumens for 150 sq ft
Hallway 5–10 750–1,500
Living room 10–20 1,500–3,000
Bedroom 10–20 1,500–3,000
Kitchen (general) 30–40 4,500–6,000
Kitchen work areas 70–80 10,500–12,000
Bathroom 70–80 10,500–12,000

From lumens to bulbs

Divide the lumens needed by the lumens on each bulb or fixture and round up. A 14 × 12 ft living room at 20 foot-candles needs 3,360 lumens; with 800-lumen bulbs that is 4.2, so five bulbs.

Layer the light

  • Ambient: overall light, the number this calculation gives.
  • Task: brighter light where you work, such as counters, desks, and vanity mirrors. Calculate those zones separately at a higher level.
  • Accent: lower-level light on art or architecture.

What makes a room feel darker

  • Dark walls and floors absorb light; light colors reflect it.
  • High ceilings put fixtures farther from the surfaces you use.
  • Narrow-beam downlights leave dark gaps if they are spaced too far apart.

Use lumens, not watts, to compare bulbs. LED packaging lists lumens on the front.

Example: a kitchen with task lighting

A 12 × 10 ft kitchen is 120 sq ft. For general light at 35 foot-candles it needs 4,200 lumens, so six 800-lumen downlights (4,800 lumens) would cover the room. Counters need more, around 70 to 80 foot-candles on the work surface, but that light usually comes from under-cabinet strips aimed at the counter rather than from more ceiling lights. Calculate the counter area separately: 15 ft of 2 ft deep counter is 30 sq ft, or about 2,250 lumens at 75 foot-candles.

Spacing ceiling lights

A common rule of thumb for recessed lights is to space them about half the ceiling height apart, so roughly 4 ft apart on an 8 ft ceiling, and about half that distance from the walls. Beam angle and trim size change this, so check the fixture’s spacing guidance. The lighting calculator lays fixtures out evenly in a grid so you can see the spacing your count produces.

Color temperature and color quality

  • 2700–3000 K (warm white) is the usual choice for living rooms and bedrooms.
  • 3000–4000 K (neutral white) suits kitchens, bathrooms, and work areas.
  • CRI 90 or higher shows skin tones, food, and paint colors more accurately, which matters at a vanity or when choosing paint.

Dimmers let one fixture count work for both bright tasks and a relaxed evening, so planning slightly more lumens on a dimmer is often better than planning too few.

Frequently asked questions

How many lumens does a 12 × 12 bedroom need?

A 12 × 12 room is 144 sq ft. At the 10 to 20 foot-candles suggested for bedrooms, that is about 1,440 to 2,880 lumens of general light, before any bedside or task lamps.

How many recessed lights do I need for a 12 × 12 room?

At 20 foot-candles you need about 2,880 lumens. With 800-lumen downlights that is 3.6, so 4 lights, often laid out in a square.

How many lumens is a 60-watt bulb?

A traditional 60 W incandescent bulb gives about 800 lumens, which is why many LED bulbs sold as 60 W equivalents are rated around 800 lumens. Always compare the lumen figure on the box.

What is the difference between foot-candles and lux?

Both measure light falling on a surface. A foot-candle is one lumen per square foot, and a lux is one lumen per square meter. One foot-candle is about 10.76 lux.

Sources

  1. The Home Depot: lumens per square foot
  2. Illuminating Engineering Society: footcandle definition
  3. ENERGY STAR: learn about brightness (lumens)
Portrait of Moazam Ali

Written and reviewed by

Moazam Ali Founder and editor

Moazam Ali is a design engineer who builds Room Calculators. He researches each formula against manufacturer and trade sources, writes the guides, and tests every worked example against the live calculator.