Room Planning guide
How to measure for curtains
Curtains are sized to the rod, not the window. Decide where the rod goes, measure from it, and then work out how many panels give the fullness you want.
1. Measure the window
For an outside-mounted rod, measure the window width from the outside edge of the trim on one side to the other.
2. Set the rod width
Extending the rod past the frame lets open curtains stack beside the glass instead of over it. Home Depot’s measuring guide suggests 8 to 10 in on each side for an outside mount; a 48 in window then takes a 64–68 in rod.
3. Choose the fullness
Fullness is the total flat width of the panels compared with the rod. About 2× gives a classic gathered look; 2.5–3× looks richer, and sheers are often hung fuller.
Panels = round up(fabric width ÷ panel width), as an even number for a pair
A 70 in window with 8 in each side takes an 86 in rod. At 2× that is 172 in of fabric; with 50 in panels, 3.44, so 4 panels (2 pairs).
4. Measure the length
Measure from where the curtain hangs (the rod, or the bottom of the rings) to the floor, then subtract the clearance you want: a small gap to hover, 0 to touch, or add length to puddle. Measure in more than one place; floors and rods are rarely perfectly level.
Rod height
Hanging the rod several inches above the frame, or partway toward the ceiling, makes a window look taller. Decide this before you measure length, since it changes the panel length you buy.
Inside-mounted rods and blinds
If the rod or blind fits inside the window frame, measure the inside width at the top, middle, and bottom, and use the smallest. Measure the height from the top of the opening to the sill in three places too. Inside mounts leave no room for stacking, so open curtains will cover some of the glass.
Example: choosing a stock length
- The top of the window frame is 84 in above the floor.
- The rod goes 6 in above the frame, at 90 in.
- Rings drop the top of the curtain about 1 in below the rod, so the curtain hangs from 89 in.
- To float 1/2 in above the floor, you need 88.5 in panels.
Stock panels of 84 in are too short and 95 in panels would drag on the floor by about 6 in. You can hem 95 in panels, or raise the rod about 6 in so 95 in panels hang just right, which also makes the window look taller. Working this out before you buy saves a return trip.
Heading styles change the numbers
- Grommets sit on the rod, so the curtain starts at the top of the rod rather than below it.
- Rod pockets gather tightly and take up more fabric, so plan the fuller end of the fullness range.
- Rings and clips hang below the rod; measure from the bottom of the ring.
Frequently asked questions
How wide should curtains be?
For a gathered look, the panels together should be about twice the rod width. A 70 in window with 8 in of extension on each side takes an 86 in rod, so about 172 in of curtain, or four 50 in panels.
How high should a curtain rod be?
A common choice is 4 to 6 in above the window frame. Hanging it closer to the ceiling, often about halfway between the frame and the ceiling or higher, makes the window look taller.
What are standard curtain lengths?
Ready-made panels in the US are commonly sold in lengths such as 63, 84, 95, 96, and 108 in. Measure your drop first, then choose the closest length that does not come up short.
Should curtains touch the floor?
It is a style choice. Many people let them float about 1/2 in above the floor for easy cleaning, let them just touch, or add a few inches so they break or puddle.