Room Planning guide

What size rug do I need?

Most rug sizing comes down to two ideas: leave an even border of floor around the rug, and make it large enough to connect the furniture that sits on it. A rug that is too small is the most common mistake.

The floor-border rule

Home Depot’s rug sizing guidance suggests leaving about 12 to 18 in of floor between the rug and the walls. Subtract twice the border from each room dimension and you have the largest rug that keeps it.

Space for the rug = (room length − 2 × border) × (room width − 2 × border)

A 14 × 12 ft room with an 18 in border leaves 11 × 9 ft, so an 8 × 10 is the largest common size that fits.

Living room layouts

  • All legs on. Every piece of seating sits fully on the rug. Needs the largest rug and suits big rooms.
  • Front legs on. The front legs of the sofa and chairs rest on the rug. The most common choice; it ties the group together.
  • Floating. Only the coffee table sits on the rug. Works in small rooms but can look undersized.

Bedrooms

A common approach is a rug that extends beyond both sides and the foot of the bed so you step onto it. Measure the bed width and add the strip you want on each side, often around 18 to 24 in, and leave the nightstands on the bare floor or on the rug consistently.

Dining rooms

Chairs should stay on the rug when pulled out. Measure the table and add about 2 ft on every side.

Bedroom examples

Rug laid sideways under the bed, showing on each side.
Bed (width) Rug Rug showing on each side
Queen (60 in) 8 × 10 ft about 30 in
King (76 in) 8 × 10 ft about 22 in
King (76 in) 9 × 12 ft about 34 in

Dining room examples

  • A 72 × 40 in rectangular table plus 2 ft on each side needs about 10 × 7.3 ft, so an 8 × 10 fits.
  • A 48 in round table plus 2 ft all round needs a 96 in circle, so an 8 ft round rug.

Metric rug sizes

Outside the US, rugs are often sold as 120 × 170, 160 × 230, 200 × 290, and 240 × 340 cm. The same border and furniture rules apply; the rug size calculator works in either unit.

Test it with painter’s tape

Before you buy, mark the rug’s outline on the floor with painter’s tape and live with it for a day. It is the fastest way to see whether the sofa’s front legs land on it, whether the door clears it, and whether the border looks even.

Common US rug sizes

5 × 8, 6 × 9, 8 × 10, 9 × 12, 10 × 14, and 12 × 15 ft are widely sold. Exact dimensions vary a little between makers, so check the listing before you lay out tape.

Frequently asked questions

What size rug for a 12 × 12 room?

With a 12 in border you have 10 × 10 ft of space, so an 8 × 10 fits. With an 18 in border the space is 9 × 9 ft, so a 6 × 9, an 8 ft square, or an 8 ft round.

What size rug goes under a queen bed?

An 8 × 10 placed sideways under a queen bed (60 in wide) leaves about 30 in of rug on each side. A 9 × 12 suits a king, leaving about 34 in on each side.

What size rug for a dining table?

Add about 2 ft to every side of the table so chairs stay on the rug when pulled out. A 72 × 40 in table needs about 10 × 7.3 ft, so an 8 × 10 works.

Should a rug pad be the same size as the rug?

Slightly smaller. Pads are usually trimmed about an inch short of the rug on every side so the edge of the rug lies flat and the pad stays hidden.

Sources

  1. The Home Depot: rug sizes for your space
  2. This Old House: how to choose the right rug size
Portrait of Moazam Ali

Written and reviewed by

Moazam Ali Founder and editor

Moazam Ali is a design engineer who builds Room Calculators. He researches each formula against manufacturer and trade sources, writes the guides, and tests every worked example against the live calculator.